All Categories

V type activated carbon chemical filter

2022-10-22 Page view : 80 views

Product features

Diaphragm free pleated filter with non-woven cloth coated with activated carbon. It is suitable for removing all polluting gases according to physical adsorption and chemical adsorption

Can choose according to the acid, alkali, organic gas corresponding adsorption materials

Can be used as a medium effect filter dust removal type

Application places

Ideal filter for mid-range healthy commercial air conditioning systems

The installation space is tight, and the ventilation and air conditioning system needs to remove dust and low-concentration gas pollutants at the same time

Used for air supply and air-conditioning system in airports, mid-range hotels, office buildings and other commercial and civil buildings, museums and libraries

Polyurethane activated carbon filter cotton adopts aluminum honeycomb, plastic honeycomb and paper honeycomb as carrier. Compared with the traditional activated carbon filter, it has more gas dynamic performance, small volume density, large specific surface area, high adsorption efficiency and small wind resistance coefficient. Honeycomb activated carbon filter is made of polyurethane foam with powdered activated carbon, its carbon content in 35%-50% left and right. Can be widely used to deal with benzene, xylene, benzene and other benzene, phenols, esters, alcohols, aldehydes and other organic gases and odor gases and contain trace heavy metals of low concentration, wind volume of all kinds of gases. The waste gas can be directly discharged after adsorption, concentration and purification.

Main index honeycomb activated carbon filter

Polyurethane foam as the base material

Activated carbon woody powder activated carbon

Carbon content > 45%

The benzene adsorption > 22%

Product features Easy aperture adjustment, good air permeability, can be arbitrary cutting

Normal size 100*200cm? , 120 * 200 cm

Conventional thickness 3-90mm

Common aperture fine hole (HR-20), medium hole (HR-15), large hole (HR-10)

(corresponding to 50-15 ppi)

The linear velocity of the drag gas is 1.0 m/s

The pressure drop < 42 pa? (4mm thick medium hole filter material test,

Note: Indicates the number of holes in 1 inch. 1 inch =25.4mm. For example, 20ppi indicates that there are 20 holes in a 25.4mm length

Diameter of about 1.3mm size can be customized according to customer requirements, products are divided into flame retardant and non-flame retardant

Activated carbon non-woven fabric specifications :35g50q80g activated carbon fiber drill 70q90g activated carbon fiber cotton activated carbon filter plate activated carbon sponge filter

Features of polyurethane sponge air filter:

Activated carbon fiber high temperature filter cloth: viscose woven cloth through a special process, high temperature carbonization, activation. Quickly deal with all kinds of harmful gases, effectively clean the air; The product has abundant micropores and high specific surface area, acid and alkali resistance, less ash, good electrical conductivity and chemical stability; The product not only has the adsorption property, but also has the good reduction energy, the adsorption, desorption speed is fast, can be repeatedly used. It has activated carbon function and the following functions :1. Small gas resistance,2. High strength,3. Not easy powder, no stratification,4. Small volume 5. Product thickness, gram large small span. Weaving methods generally have two sides: flat weaving and oblique weaving.

General application:

1. Air conditioning and ventilation system odor and polluted air treatment;

2, mainly used in organic solvent recovery, air purification, sewage treatment, health care, protective clothing, electronics and energy fields and corrosion and high temperature resistant places.

3, harmful gases (such as benzene, formaldehyde, ammonia, etc.) adsorption deodorization;