All Categories

How to solve the problem of filter bag damage?

2023-04-14 Page view : 65 views

1. The bottom of the dust filter bag is damaged
The outside of the filter bag is more damaged, and the damaged surface has obvious wear marks. The stitching at the bottom of the dust filter bag is worn according to the fabric of the filter. If the condition is severe, the bottom of the bag can crack or come apart completely. Adjust the dust collection operation of the dust collector dust filter bag ash bucket to prevent excessive dust accumulation and form Foucault’s movable wear-resistant filter bag. (Shanghai dust filter bag manufacturer)
2. Damage the bottom of the filter bag
The outside of the filter bag is prone to damage at the bottom of the filter bag. Within 300mm, the damage is mainly on one side, especially on the lower part, and gradually decreases upward. In the absence of wear, some threads will wear out and become strong. This damage is more common in porous plate deformation, porous plate narrow distance, bag deformation and filter bag too long. The wall of filter bag and dust collector is damaged due to friction. (Shanghai ptfe dust filter bag manufacturer)
3. Whether the dust removal filter bag is damaged.
Most of the damage of the dust removal filter bag is in the range of 400, most of the damage is from the inside to the outside, the head of the bag and the main body of the bag is separated.
Cause: The cause of damage is the compressed air is too high, the skew of the ventilation pipe, the deformation of the flower plate, etc., and the damage can be avoided after adjustment. (Shanghai dust filter bag manufacturer)
4. The main body of the dust removal filter bag is damaged
When the damage mark is from the inside to the outside, it indicates damage in the longitudinal rib of the bag, indicating that the longitudinal rib of the bag has fallen off or rusted. In addition, if the ptfe dust filter bag is grounded, or the pressure is too high, because the spray is too frequent, to make the dust filter bag filter bag and filter bag. The contact position of the retainer is damaged. Replacing the bag basket or adjusting the blower can solve the problem.